Logan's Equipment

  • 9111 State Route 12
  • Copenhagen, NY 13626
  • Call Us: (315) 688-4414
  • https://www.logansequipment.com/
Print This Page

2024 Jaylor Horizontal Quad Auger H1950

Information

2024 Jaylor Horizontal Quad Auger H1950

Ideal for large-scale operations, the H1950 Quad Auger TMR Mixer was designed with cattlemen in mind. Unprecedented large-flake integrity is a key benefit of this technology. Operations are rewarded with higher effective fibre yields due to less feed compression within the mixing process

Our OrbitEvo Intelligent Controller and 5 button joystick allow for precise, one-handed control of the mixer. With everything at your fingertips, enjoy a short learning curve with the added bonus of saving up to one gallon of fuel per hour. Along with the 10-20% capacity increase (by weight) from our New Ribbon Augers, your operation can quickly realize ROI.

Features may include:
  • Patented Ribbon Augers
  • Hydrostatic Planetary Drive
  • Single Joystick Control
  • Hydraulic Reservoir
  • Heavy Duty Construction
  • Oil-resistant Door Seals
  • Gravity Discharge Chute
  • High Capacity Door
  • Central Grease Ports
  • Adjustable Chute Control
  • Remote Display & LED Lights
  • Smart Control System
  • Oil Bath Auger Drive
  • OrbitEvo 6520 Intelligent Controller
  • Digital Display Console
  • Advanced Joystick Control
  • Heavy Duty Construction
  • Simple Gravity Discharge Chute with Magnet
  • Heavy Duty Planetary Drive
  • Durable 30,000lbs Load Cells
  • Rear Bumper with Lights
  • Hydrostatic Pump with Flange
  • Slim Hydraulic Reservoir

Photos

Highlights

  • Copenhagen, New York
  • 2024
  • Jaylor
  • Horizontal Quad Auger H1950
  • Available
  • Box: 102 in (259 cm) | Door Openning: 48 in (122 cm)
  • Box: 88 in (224 cm) | Discharge On Typical Truck: 52 in (132 cm)

Specifications

  • 2024
  • Jaylor
  • Horizontal Quad Auger
  • H1950
  • Truck Mount
  • Recommended Truck: 360 hp
  • Auger: Hydrostatic
  • 4-26 rpm
  • Floor Thickness: 1/4 in (6 mm) | Drum Wall Thickness: 1/4 in (6 mm)
  • Box: 88 in (224 cm) | Discharge On Typical Truck: 52 in (132 cm)
  • 233 in (592 cm)
  • Box: 102 in (259 cm) | Door Openning: 48 in (122 cm)
  • On Typical Truck: 133 in (338 cm)
  • On Typical Truck: 320 in (813 cm)
  • On Typical Truck: 102 in (259 cm)
  • Top Thickness: 1/2 in (12.7 mm) | Lower Thickness: 5/8 in (16 mm)
  • 950 ft3 (26.9 m3)
  • Ration: 28000 lbs (12700 kg)
  • Box: 22000 lbs (10000 kg)
  • Rear Axle Requirement: 44000 lbs (20000 kg) | Front Axle Requirement: 14000 lbs (6400 kg)